NAUTICAM ATOMOS NINJA V-S
FOR ATOMOS NINJA V AND NINJA V+ 5" RECORDER/MONITOR/PLAYER (EXCL. HDMI 2.0 CABLE) WITH ATOMOS ATOMX SDI MODULE
SKU # 17922S
With more cameras offering high quality HDMI and SDI video output, the Atomos Ninja V steps in, not only as a stunning monitor but also as a recorder of 4K 60p 4:2:2 10-bit video to on-board SSD drives in edit-friendly ProRes or Avid formats as well as RAW with supported cameras. The Ninja V+ will allow for up to 4K 120p and 8K 30p ProRes RAW recording. The Nauticam NA-Ninja V-S, when used with supported housings and cameras, allows for the connection of the Ninja V over HDMI 2.0 or SDI in addition to providing easy access to the Ninja V controls underwater. This 'S' version allows for the use of the AtomX SDI Module inside the housing to use the Atomos Ninja V as an SDI monitor/recorder or to facilitate SDI cross conversion for a dual/remote monitor configuration.
TECHNICAL SPECIFICATIONS
| Dimensions | 223mm(W) x 169mm(H) x 143mm(D) excl. bulge at rear |
| Weight in Air | 1.67kg |
| Weight in Water | -0.31kg (incl. Ninja V, AtomX SDI and NP-F970 batt) |
| Depth Rating | 100m |
NOTE: HDMI and SDI cables for this housing are SOLD SEPARATELY, you can find the appropriate one in the Recommended Accessories section below.
Only AtomX SSDmini drives are supported in the housing. Conventional SSD in the Atomos Master Caddy are not compatible.
What's In The Box:
- NA-Ninja V-S Housing
- Monitor Hood
- M16 Vacuum Valve II (pre-installed) PN 25625
- M16 SDI Bulkhead (pre-installed) PN25058
- M28 to M16 Step Down Adapter (pre-installed) PN25080
- Internal SDI Cable PN25060
- M28 HDMI 2.0 Adapter (pre-installed) PN25089
- Mounting Ball
- Spare silicone rubber main o-ring PN 90137
- O-ring removal tool and lubricant
- CR2032 battery
- Allen Wrench Set
Recommended Accessories:
- 25077 HDMI 2.0 Cable for NA-XT3 Housing
- 25078 HDMI 2.0 Cable for NA-BMPCCII/S1R Housing
- 25079 HDMI 2.0 Cable for NA-GH5V Housing
- 25082 HDMI 1.4 Cable for HDMI Bulkhead
